2.4 Service Settings
Programming Manual 93
Keypad Assignment 0–9, *, #
Any of the 16 operations listed below can be assigned to the 0 through 9, , and # keys on the
telephone keypad. Callers are able to access these operations by pressing the corresponding keys
on their telephones.
Value Range
Tr to Mbx: Allows the caller to leave messages in a specified mailbox.
Tr to Ext: Transfers the caller to a specified extension.
Operator: Connects the caller to an operator.
Tr to Out: Transfers the caller to a specified outside telephone number. Enter the Trunk Access
number of the PBX then the destination telephone number.
Exit: Plays the Custom Service exit prompt and disconnects the caller.
Prev Menu: Returns the caller to the previous menu (not available if there was no previous menu).
CS: Transfers the caller to the Custom Service specified here.
VM Serv: Allows the caller to access Voice Mail Service.
Call Tr Serv: Allows the caller to access Automated Attendant Service.
Subscriber Serv: Allows the caller to access Subscriber Service. If this option is enabled, it is
strongly recommended that each subscriber establish a password; this will prevent unauthorised
callers from accidentally or intentionally accessing subscribers' mailboxes.
Dial by Name: Requests the caller to enter the first 3 or 4 letters of a first or last name of the person
the caller wishes to reach, then transfers the caller to the corresponding extension.
Repeat Menu: Repeats the Custom Service menu.
Main Menu: Returns the caller to the Custom Service top menu.
Fax Tr: Allows the caller to send fax messages to an extension specified as the fax extension.
List All Names: The VPS will announce the names and extensions numbers of all subscribers
(except those whose Class of Service "Directory Listing" parameter is set to "No").
None: No operation assigned.
Feature Manual References
2.2.16 Custom Service
Date Control
This service allows you to assign a different operation for up to 5 time periods. The caller makes no
selection and no menu is announced.
Description
The information typed in this field is for reference only.
Value Range
Max. 32 characters
Feature Manual References
2.2.16 Custom Service
To Next Page
Loading...
