Panasonic KX-TVM50 - Connecting the KX-TVM50 to the KX-TDA30

2.7 Connecting the KX-TVM50 to the KX-TDA30
Note
• 4-conductor cables must be used in order to use DPT Integration.
• For DPT Integration, jack 1 must be connected to the lowest numbered port of the Voice Mail group
assigned through PBX programming.
Connection Example (Factory-installed Jacks, DPT Integration Mode)
PBX (KX-TDA30)
Slot 1
Port 2
Port 1
Port 4
Port 3
Port 2
Port 1
KX-TVM50
Assigned as VM (DPT) ports
Jack 1
Jack 2
Factory- installed
Jacks
DLC4 Card
01
02
03
01
02
03
Jack 2
Jack 1
16 Getting Started Document Version 2.1 2008/04
2.7 Connecting the KX-TVM50 to the KX-TDA30