Panasonic KX-TVM50 - Connecting the VPS to a PC or LAN

2.9 Connecting the VPS to a PC or LAN
The VPS can be connected to a PC via USB or to a LAN (optional KX-TVM594 LAN Interface Card required
for KX-TVM50).
PC
To USB port
KX-TVM200KX-TVM50
To network port
Switching Hub
PC
PC
PC
KX-TVM200KX-TVM50
Note
• The VPS must be connected to a PC via USB for initial programming.
• We recommend using a USB cable of no more than 5 m in length.
• Use a category 5 cross cable (user-supplied) when connecting the VPS to a switching hub.
• For modem connection, refer to 2.10.3 Modem Connection in the Installation Manual.
18 Getting Started Document Version 2.1 2008/04
2.9 Connecting the VPS to a PC or LAN