Panasonic KX-TVM50 - Subscriber Tutorial (Easy Mailbox Configuration)

2.4 Removing the Dummy Cover Plates
The model shown here is the KX-TVM200, however this procedure is the same for the KX-TVM50.
For KX-TVM50:
This procedure is not necessary if you do not plan on installing optional cards in the KX-TVM50.
Remove the appropriate dummy cover plates from the main unit using cutting pliers, as shown below.
Dummy Cover Plate
CAUTION
For safety reasons, smooth the cut edges after removing the dummy cover plates.
Document Version 2.1 2008/04 Getting Started 9
2.4 Removing the Dummy Cover Plates