Note
• Drive the screws into the wall until each screw head is the same distance from the wall.
• Install the screws perpendicular to the wall.
3. Mount the AC adaptor as shown.
Mounting on Concrete or Mortar Wall
CAUTION
When driving the mounting screws into the wall, be careful to avoid touching any metalwork (metal/wire
laths, etc.), conduits, or electrical cables buried in the wall.
1. Place the AC adaptor wall mounting template (found later in this section) on the wall to mark the locations
where the 2 screws need to be placed.
2. Install 2 anchor plugs (user-supplied) in the wall, then install the screws (included) in the wall.
To Next Page
Loading...
