Mailbox Settings for E-mail Integration
The following settings must be made in order for a subscriber to use E-mail Integration features.
1. Start KX-TVM Maintenance Console and connect to the VPS.
2. Click Mailbox Settings (under Shortcuts), then click Add Mailbox... or select a mailbox and click Edit
Mailbox....
3. Enter the user name for the subscriber’s e-mail account next to Username.
4. Enter the subscriber’s e-mail address next to E-mail Address. Up to 3 addresses can be set by inserting
a comma between each address.
5. Set Send E-mail with New Messages to Enable to allow the subscriber to receive e-mail notifications.
6. Set Attach Voice File to Enable to allow the subscriber to receive voice messages as e-mail file
attachments.
7. Click Click to edit... next to E-mail Schedule to determine when e-mail messages are sent, and make
the appropriate settings.
8. Click OK when finished.
50 Getting Started Document Version 2.1 2008/04
4.5 E-mail Integration Settings
To Next Page
Loading...
