62
DVQX1572 (ENG)
Wi-Fi/Bluetooth
Connect to a smartphone via Wi-Fi.
• You can also connect via Wi-Fi to a smartphone that supports Bluetooth low energy by
following the same steps.
(On the camera)
A SSID
• The information required for directly connecting your
smartphone to this unit (SSID) is displayed.
(On your smartphone)
1 Turn on the Wi-Fi function in the setup menu.
2 On the Wi-Fi setting screen, select the SSID
displayed on the camera.
3 Start “Image App”.
• When the connection confirmation screen is displayed on
the camera, select [Yes] to connect. (For first time
connection only)
Connecting the camera to a smartphone that does not
support Bluetooth low energy
Connecting without using the password
> [Setup] > [Wi-Fi] > [Wi-Fi
Function] > [New Connection] >
[Remote Shooting & View]
At the time of purchase, [Wi-Fi Password] is set to [OFF].
Before connecting to a Wi-Fi network, ensure that the device displayed on the
connection confirmation screen is the one you actually want to connect to. When
a wrong device is displayed, if you select [Yes], the camera will automatically
connect to that device.
We recommend that you set [Wi-Fi Password] to [ON] if, for example, there is
another Wi-Fi device nearby.
MENU
DC-LX100M2PPP-DVQX1572_eng.book 62 ページ ２０１８年８月７日 火曜日 午後５時１０分
To Next Page
Loading...
