66
DVQX1572 (ENG)
Wi-Fi/Bluetooth
1 Make a Bluetooth connection to the smartphone. (P60)
2 Operate the smartphone.
¥
When the camera turns off after [Sleep Mode] is activated during recording, you can
reselect [Shutter Remote Control] on the smartphone to turn it on again.
(The following settings are required.)
–[Remote Wakeup]: [ON]
–[Auto Transfer]: [OFF]
¥ You can perform [B] (Bulb) recording by setting the shutter speed dial to [T] (Time) in
Manual Exposure Mode. (Up to 30 minutes) This function is useful when you take
pictures of stars in the night sky or a night scene, since the shutter can be kept open
from start of recording to end of recording. Further information is provided in the
“Owner’s Manual for advanced features (PDF format)”.
∫ Reducing the time to recover from Sleep mode
Select the smartphone function to be used as a priority function when waking the
camera from [Sleep Mode] with a smartphone.
Preparation:
Set [Bluetooth] and [Remote Wakeup] to [ON]. (P64)
Operating the shutter button with a smartphone via a Bluetooth
connection alone
Wireless connectivity required:
1 Select [ ].
2 Select [Shutter Remote Control].
3 Take pictures.
• [Shutter Remote Control] is available when the camera on/off switch is set to
[ON].
• The live view image of the camera cannot be monitored on the smartphone.
> [Setup] > [Bluetooth] > [Returning from Sleep Mode]
Shortens the time required to wake the camera with
[Remote operation] or [Transfer image].
[Remote / Transfer Priority]
Shortens the time required to wake the camera with
[Shutter Remote Control].
[Shutter Remote Priority]
MENU
DC-LX100M2PPP-DVQX1572_eng.book 66 ページ ２０１８年８月７日 火曜日 午後５時１０分
To Next Page
Loading...
Need help?
General
