74
DVQX1572 (ENG)
Others
• The subject is beyond the focus range of the camera.
• Is [Focus/Release Priority] in the [Custom] menu set to [RELEASE]?
• Is [Shutter AF] in the [Custom] menu set to [OFF]?
• Is the AF Lock applied incorrectly?
• If there are fingerprints or dirt on the lens, the focus may be set to the lens and not the
subject.
• The shutter speed will become slower and the Image Stabilizer function may not work
properly when taking pictures especially in dark places.
> We recommend using a tripod and the self-timer when taking pictures with a slow
shutter speed.
• If you record a moving subject when using the electronic shutter or recording motion
picture or a 4K photo, the subject may appear distorted on the picture. This is
characteristic of MOS sensors which serve as the camera’s pickup sensors. This is not
a malfunction.
• This is characteristic of MOS sensors which serve as the camera’s pickup sensors.
This is not a malfunction.
• When using the electronic shutter, lowering the shutter speed may reduce the effect of
the horizontal stripes. (P35, 36)
• If noticeable flicker or horizontal stripes appear under lighting such as a fluorescent or
LED lighting fixture during motion picture recording, manually adjust the shutter speed
to 1/60 or 1/100. Setting a fixed shutter speed can reduce the flicker or horizontal
stripes.
• Drive mode is set to other than [Single]. (P28)
• Are you using the bracket function? (P46)
The subject is not focused properly.
The recorded picture is blurred.
The Image Stabilizer is not effective.
The subject appears distorted on the picture.
Flicker or horizontal stripes may appear under lighting such as a
fluorescent or LED lighting fixture.
Multiple pictures are taken at one time.
DC-LX100M2PPP-DVQX1572_eng.book 74 ページ 2018年8月7日 火曜日 午後5時10分