Others
75
(ENG) DVQX1572
• When recording under fluorescent or LED lighting fixture, etc., increasing the shutter
speed may introduce slight changes to brightness and color. These are a result of the
characteristics of the light source and do not indicate a malfunction.
• When recording subjects in extremely bright locations or recording under fluorescent
lighting, LED lighting fixture, mercury lamp, sodium lighting, etc., the colors and screen
brightness may change or horizontal striping may appear on the screen.
• You may not be able to record for a short while after turning this unit on when using a
large capacity card.
• This may occur when taking a picture by reducing the Auto Focus speed in order to
adjust the focus at high precision. This is not a malfunction.
• The flash becomes unavailable in the following case.
> Flash set to [Œ] (Forced Flash Off). (P47)
• When the electronic shutter is used, the flash is not activated.
• When [Silent Mode] is set to [ON], the flash is not activated.
• When an object or your hand is positioned near the eye sensor, the Monitor display may
switch to the Viewfinder display.
The brightness or the hue of the recorded picture is different from the
actual scene.
Recording motion pictures is not possible.
Sometimes focus adjustment with Auto Focus mode is difficult while
recording 4K motion pictures.
The flash is not activated.
The Monitor turns off although the camera is turned on.
DC-LX100M2PPP-DVQX1572_eng.book 75 ページ ２０１８年８月７日 火曜日 午後５時１０分
To Next Page
Loading...
Need help?
General
