Preparation
11
Charging the Battery
1
Connect the AC cable.
• The [POWER] indicator
A
lights.
2
Attach the battery to the AC adaptor.
(1 # 2)
• The [CHARGE] indicator
B
lights and
charging starts.
3
When the [CHARGE] indicator B
turns off, charging is finished.
• Charging is finished in 90 minutes.
4
Remove the battery from the AC
adaptor.
• The battery cannot be charged when the DC cable is connected to the AC adaptor.
• After use, be sure to disconnect the AC cable.
• The battery becomes warm after use/charge or during the charge. The camera also
becomes warm during use. However, it is not malfunction.
• The battery/AC adaptor supplied with this camera is exclusively designed for this camera.
Do not use with any other equipment.
THE SOCKET OUTLET SHALL BE
INSTALLED NEAR THE EQUIPMENT
AND SHALL BE EASILY ACCESSIBLE.
4
2
2
1
KC42‑PP.book11ページ２００２年１２月１９日 木曜日 午後４時３６分
To Next Page
Loading...
