Panasonic Lumix DMC-F1 - Formatting the Card

Technical use
69
Formatting the Card
Usually, it is not necessary to format the card
(initializing). Format the card when this
message is displayed “MEMORY CARD
ERROR”.
• If the card has been formatted by a PC or other
equipment, format the card on the camera again.
[Preparation]
• Set the mode dial to playback [ ]. (P22)
1
Press the [MENU] button.
2
Press 3/4 to select [FORMAT] and
then press 1.
3
When this message is displayed
“DELETE ALL DATA ON THE
MEMORY CARD?”, press 2/1 to
select [YES].
4
Press the 4/[REVIEW/SET] button .
• The card is formatted.
• After formatting, recorded images and any
other data cannot be recovered.
• During formatting, do not turn the power off.
• If the card cannot be formatted, consult your dealer.
1 2,3,4
SETUP
PLAY 2/2
FORMAT
TRIMMING
SELECT SET EXIT
MENU
2
DELETE ALL DATA
ON THE MEMORY CARD?
FORMAT
YES NO
SELECT
SET
3
For USA assistance, please call: 1-800-272-7033 or send e-mail to : consumerproducts@panasonic.com
For Canadian assistance, please call: 1-800-561-5505 or visit us at www.panasonic.ca
KC42‑PP.book69ページ２００２年１２月１９日 木曜日 午後４時３６分