26
Basic operations
Selecting pictures
Select pictures to display, copy, move or edit, etc.
In addition to selecting pictures by clicking a thumbnail, you can also select them by adding a check mark in the picture selection window of
each function.
Selection
Click a picture to add a frame around it.
Check mark
Click the picture to add a check mark.
To select pictures
1
Click pictures in the display area.
Clicked picture is enclosed by a frame and the picture is
selected.
●To select two or more pictures
Click the pictures while holding down the [Ctrl] key.
●To select two or more successive pictures
Select the first picture, then hold down the [Shift] key while you
select the last picture.
●To select all displayed pictures
- Click [Select all] (
A
).
- Left-click the display area, then hold down the [Ctrl] key while
you press the [A] key.
●To deselect pictures
- Click [Deselect all] (
B
).
- Click a location other than a picture in the display area.
Tips
●Pictures cannot be selected in the calendar display (year or month
display).
●Thumbnails with an [Error] display will be shown for either of the
following reasons:
- The folders or picture files have been moved or deleted using
different software after folders were registered or the picture files
were copied using this software.
- The registry folder designated with this software does not exist.
Refer to the “Display” section in “Troubleshooting (Q&A)” for help
(→116)
A
B
To Next Page
Loading...
