71
Processing still pictures
Changing several picture file names at one time
1
Select [Tools] → [Still picture tool] →
[Batch Rename] from the menu.
The [Batch Rename] screen is displayed.
2
Select a picture by selecting its check
box and click [Next].
3
Set the file name.
4
Click [Execute].
5
When the confirmation message is
displayed, click [Yes].
The file names are changed according to the settings.
6
Click [OK].
7
Click [Close].
Tips
●If there is a file having the same name and the same serial number,
the serial number will be skipped and next number will be set.
Name Settings
Setting a character string
A
: The file name is a combination of the characters entered here
and a serial number.
(Up to 32 characters (single-byte) can be used.)
B
: The file name is a combination of the original file name and a
serial number.
Setting a number
C
: The settable range for the starting number of the serial
number is 0 to 1000.
D
: The settable range for the number of digits for the serial
number is 1 to 9.
E
: The settable range for the increment of the serial number is 1
to 1000.
Setting the order
F
: Set the order of the character string and number that will be
used as the file name.
Files to be renamed
G
: Check the file name after conversion.
G
A
F
B
C
E
D
To Next Page
Loading...
