Panasonic LUMIX DMC-FP1

20 VQT2M98 VQT2M98 21
For details about the setting procedure in the [SETUP] menu. (14)
Using [SETUP] menu (Continued)
[RESET]
Reset to the default
settings.
[RESET REC. SETTINGS?]
[YES]/[NO]
[RESET SETUP PARAMETERS?]
[YES]/[NO]
• Resetting the setup parameters will also reset the
following.
- Age in years/months and names in Scene Modes
[BABY] and [PET]
- [TRAVEL DATE]
- [WORLD TIME]
- [FAVORITE] in [PLAYBACK] menu (set to [OFF])
- [ROTATE DISP.] (set to [ON])
• Folder numbers and clock settings will not be reset.
• Camera movement may be aud ble as the lens function
is reset. This is not a fault.
[USB MODE]
Select communication
method for when
connecting camera to a
computer or printer with
USB connection cable.
[SELECT ON CONNECTION]:
Select [PC] or [PictBridge (PTP)] each time you connect to
a computer or PictBridge-compatible printer
[PictBridge (PTP)]: Select when connecting to a
PictBridge-compat ble printer
[PC]: Select when connecting to a computer
Item Settings, notes
[VIDEO OUT]

Change the video output
format when connected
to a TV, etc. (Playback
Mode only).
[NTSC]/[PAL]
• Operates when AV cable is connected.
[TV ASPECT]
Change the aspect ratio
when connected to a
TV, etc. (Playback Mode
only).
/
• Operates when AV cable is connected.
[VERSION DISP.]
Check the version of the
camera firmware.
Current version is displayed.
[FORMAT]
Use when [BUILT-IN
MEMORY ERROR]
or [MEMORY CARD
ERROR] appears, or
when formatting the built-
in memory or card.
When a card/built-in
memory is formatted,
the data cannot be
restored. Check the
content of the card/
built-in memory
carefully before
formatting.
[YES]/[NO]
• This requires a sufficiently charged battery (8) or AC
adaptor (optional). When formatting the built-in memory,
remove any cards.
(Only inserted card will be formatted if present; built-in
memory will be formatted if no card is inserted.)
• Always format cards with this camera.
• All picture data including protected pictures will be
deleted. (72)
• Do not turn off power or perform other operations during
formatting.
• Formatting the built-in memory may take several
minutes.
• Consult your nearest Service Center if format cannot be
successfully completed.
 
PAL video out is not available on the version DMC-FP2P/DMC-FP1P sold in the U.S.
and the version DMC-FP2PC/DMC-FP1PC sold in Canada.
Item Settings, notes
For details about the setting procedure in the [SETUP] menu. (14)