58 VQT2M98 VQT2M98 59
Using [REC] menu (Continued)
For details about the setting procedure in the [REC] menu (14)
[COLOR MODE]
Set color effects.
Mode:
Settings: [STANDARD] / [NATURAL] (soft) / [VIVID] (sharp) / [B/W] / [SEPIA] /
[COOL] (more blue) / [WARM] (more red)
If interference is noticeable in dark locations: Set to [NATURAL].
In ([INTELLIGENT AUTO] Mode), [STANDARD], [B/W], and [SEPIA] only can be set.
[STABILIZER]
Automatically detects and prevents jitter.
Mode:
Settings:
Settings Effect
[OFF] Pictures deliberately taken with no jitter correction
[AUTO]
The optimum image stabilizer is performed automatically based on the
recording conditions
[MODE 1]
Constant correction
(Monitor image stable, composition easy to determine)
[MODE 2]
Correction when shutter button is pressed
(More effective than [MODE 1])
Setting fixed to [MODE 2] in [SELF PORTRAIT] and [OFF] in [STARRY SKY] Scene
Modes.
Cases where Optical Image Stabilizer may be ineffective:
Heavy jitter, high zoom ratio (including Digital Zoom range), fast-moving objects,
indoors or in dark locations (due to low shutter speed)
This is fixed at [MODE 1] during motion picture recording.
[AF ASSIST LAMP]
Illuminates lamp when dark to facilitate focus alignment.
Mode:
Lamp: Effective distance: 1.5 m (4.92 feet)
(Do not cover or look at lamp from close range)
Settings: [OFF] : Lamp off (taking pictures of animals in dark, etc.)
[ON] : Lamp illuminated with halfway press of shutter
button (
and larger AF area displayed)
Cannot be set in Motion Picture Recording Mode. The setting in
other Recording Mode is applied.
[RED-EYE REMOVAL]
Automatically detects red-eye and corrects still picture data when recording with flash
red-eye reduction (
).
Mode:
Settings: [OFF]/[ON]
Disabled when [AF MODE] is other than (Face Detection).
Compensation may not be possible, depending on red-eye conditions.
When [ON] is selected, is displayed in the flash icon. (35)
[CLOCK SET]
Set the clock. Same function as that in [SETUP] menu (12).
To Next Page
Loading...
