108
Convenient functions
Setting the operation when the same file name exists
You can set the operation if there is a still picture of the same name already in the save destination folder (including the subfolder) when
copying to a PC.
1
Select [Tools] → [Settings] from the
menu.
The settings window is displayed.
2
Click [Still Picture] — [Copy to PC].
3
Set the operation when there are files
with the same name.
[Auto]: Modification date, time and size of file are
compared. And if a same file is identified, then it is
judged as an identical file and thus pictures from
it are not acquired. If one of them is different from
the other, then pictures are acquired by adding a
numerical character in the brackets at the end of
the file name.
[Manual]: Perform the specified process.
[Add number to the end of the file name]:
Save with a different name.
[Skip]: Do not save.
[ Overwrite]:Overwrites if the file is the same (same
update date, size). If the file is not the same, it
does not overwrite and save but instead adds a
number in parentheses at the end of the file name.
4
Click [Apply].
●When [OK] is clicked, the settings are applied and the window
is closed.
Tips
●When copying a picture file that has an associated file (→119), if there is
a file with the same name as either file in the save destination folder,
[Operation when the same file name exists] is followed for both files.
To Next Page
Loading...
Need help?
General
