79
Printing pictures
Utilizing pictures
5
Select the information and other items to print.
[Show date]: The recording date is printed.
If the number of travel days or age in months/
years are recorded for a picture, these too are
printed.
[Show title information]: The title information is printed.
[Show Face Recog. name]: The name registered in the Face
Recognition function is printed.
[Frame]: A frame is set around the picture.
Click
to change the frame color.
[Trimming]: Cut the picture so that the printing fills the paper.
Click [Top], [Bottom], [Left] and [Right] to adjust
the printing position.
Click [Centring] to move the picture to the center.
[Categorisation information]: Comments or keywords are
printed. (→36, 45)
6
Check the print preview.
Click to check the print preview of other pictures.
●The print preview also changes if you directly enter the page
number.
[Enlarged view]: Display an enlarged view of the print
preview.
7
Click [Print start].
The printing starts.
●To stop printing while it is processing, click [Cancel].
8
Click [Close].
9
Click [Close] after returning to the [Print]
screen.
Tips
●If there are pictures imprinted with the date and title information from
a digital camera that is compatible with the [DATE STAMP] and [TEXT
STAMP] functions, the message “The same data will be printed over
the existing date and the title information” appears when [Show date]
or [Show title information] is checked.
- If [Yes] is clicked, the recording date, title information, Face
Recognition name, etc., will be printed.
- If [No] is clicked, the check boxes are cleared.
(If there are pictures with the date and title information burned in
using a different function, the message will not appear, so check the
contents carefully in [Print Preview].)
●If [Show date] is selected for a picture that does not have recording
date information, the last update date is printed.
●The date may not be properly printed for pictures recorded before
the date was set or with digital cameras that were not made by
Panasonic.
●The display format of the date follows the Windows settings (Regional
Settings).
To Next Page
Loading...
Need help?
General
