43
Recording Modes
(ENG) SQT0628
Selecting the Method for Measuring Brightness
([Metering Mode])
Applicable modes:
Type of optical measurement to measure brightness can be changed.
Setting the Shutter Type
Applicable modes:
You can use either of the two shutters to take pictures: the mechanical shutter or the
electronic shutter.
¢ The mechanical shutter sound cannot be muted.
> [Rec] > [Metering Mode]
[]
(Multiple)
This is the method in which the camera measures the most suitable
exposure by judging the allocation of brightness on the whole screen
automatically.
Usually, we recommend using this method.
[]
(Centre weighted)
This is the method used to focus on the subject on the centre of the
screen and measure the whole screen evenly.
[]
(Spot)
This is the method to measure the subject in the spot
metering target A.
Mechanical Shutter Electronic Shutter
Description
The camera starts an exposure
electronically, and ends it with the
mechanical shutter.
The camera starts and ends an
exposure electronically.
Flash ± —
Shutter Speed
(Sec.)
60 to 1/4000th 1 to 1/16000th
Shutter sound
Mechanical shutter sound
¢
+
Electronic shutter sound
Electronic shutter sound
DMC-FZ1000_GA_eng.book 43 ページ ２０１４年８月１９日 火曜日 午後７時１９分
To Next Page
Loading...
