51
Recording Modes
(ENG) SQT0628
Applicable modes:
You can check areas that may be white saturated by displaying areas above a certain
luminance level in a zebra pattern. You can also set the minimum luminance level
(brightness) to be processed as a zebra pattern.
Optical Image Stabiliser
The camera detects jitter during recording and automatically corrects it, so you can record
images with reduced jitter.
Confirm that the O.I.S. switch is set to [ON].
∫ Setting the Stabiliser in the [Rec] menu
1
Select the menu.
2
Press 3/4 to select the item and then press [MENU/SET].
Checking areas that may be white saturated ([Zebra Pattern])
> [Custom] > [Zebra Pattern]
[ZEBRA1]
Displays areas above a certain luminance level by a
right-leaning zebra pattern.
[ZEBRA2]
Displays areas above a certain luminance level by a
left-leaning zebra pattern.
[OFF] —
[SET]
Sets the minimum brightness level for each zebra pattern.
[Zebra 1]/[Zebra 2]
Press 3/4 to select the brightness, and press [MENU/SET].
> [Rec] > [Stabilizer]
[]
([Normal])
Vertical and horizontal shake are compensated for.
[]
([Panning])
Camera shake is corrected for up/down movements.
This mode is ideal for panning (a method of taking pictures which involves
turning the camera to track the movements of a subject which continues
to move in a fixed direction).
MENU
DMC-FZ1000_GA_eng.book 51 ページ ２０１４年８月１９日 火曜日 午後７時１９分
To Next Page
Loading...
