Panasonic Lumix DMC-FZ1000 - Taking Pictures Using Burst Mode

45
Recording Modes
(ENG) SQT0628
Taking Pictures using Burst Mode
Applicable modes:
Pictures are taken continuously while the shutter button is pressed.
•
Pictures taken with a burst speed of [SH] will be recorded as a single burst group.
1
Set the drive mode dial to [ ].
2
Focus on the subject and take a picture.
• Hold down the shutter button fully to activate the Burst
Mode.
∫ Changing the burst speed
1 Select the menu.
2 Press 3/4 to select the burst speed and then press [MENU/SET].
> [Rec] > [Burst Rate]
[SH]
¢
2
(Super high
speed)
[H]
(High
speed)
[M]
(Middle
speed)
[L]
(Low speed)
Burst speed
(pictures/
second)
AFS 50 12 7 2
AFF/AFC — 7 7 2
Live View during Burst Mode None None Available Available
¢1
With RAW files —101010
Without RAW
files
Max. 60 Depends on the capacity of the card
¢1 Number of recordable pictures
¢2 The electronic shutter will operate.
AFSAFS
L
3:2
H
50
i
MENU
DMC-FZ1000_GA_eng.book 45 ページ ２０１４年８月１９日 火曜日 午後７時１９分