58
Using the Wi-Fi function
SQT0628 (ENG)
1 Press and hold [Wi-Fi] on the camera.
2 Turn on the Wi-Fi function in the setting menu of the
smartphone.
3 Select the SSID displayed on the screen of the
camera.
A SSID and password
4 Enter the password displayed on the screen of the
camera.
•
If you are using an Android device, marking the box for password
display will allow the device to display the password as you enter it.
5 On the smartphone, start “Image App”.
After use, terminate the connection to the smartphone.
1 Press [Wi-Fi] on the camera. (P54)
2 On the smartphone, close “Image App”.
For both iOS devices (iPhone/iPod touch/iPad) and Android devices
Entering a password to set up a connection
For both iOS devices (iPhone/iPod touch/iPad) and Android devices
Terminating the connection
If you are using an iOS device
On the screen of “Image App”, press the home button to close the app.
If you are using an Android device
On the screen of “Image App”, press the return button twice to close the app.
DMC-FZ1000_GA_eng.book 58 ページ ２０１４年８月１９日 火曜日 午後７時１９分
To Next Page
Loading...
