117
4. Recording Modes
This effect adds a cast of light to the scene.
∫ Setting the light source
You can change the position and size of the light source.
1 Press [Fn1] to display the setting screen.
2 Press 3
/
4
/
2
/
1 to move the center position of the
light source
.
• The center of the light source can be moved to the edge of
the screen.
3 Adjust the size of the light source by rotating the rear dial.
•
It can be changed to 4 different sizes.
• Pressing [DISP.] returns the light source setting to the default setting.
4 Press [MENU/SET] to set.
•
Display of the recording screen will be delayed more than usual and the screen will look as if
frames are dropping.
[Sunshine]
Items that can be set
(Press 1 to display the setting screen.)
Color Yellow tone/Red tone/Blue tone/White tone
• Select the color tone by rotating the
rear dial, and then press [MENU/SET].
Point for when placing the center of the light
source
A more natural appearance can be created by placing
the center of the light source outside the image.
To Next Page
Loading...
