7. Shutter and Drive Settings
180
Creating Stop Motion Pictures ([Stop Motion
Animation])
Applicable modes:
A stop motion picture is created by splicing pictures together.
•
Set the date and time settings in advance. (P35)
• Pictures taken with [Stop Motion Animation] are displayed as a set of group pictures. (P225)
1 Set the drive mode dial to [ ].
•
To use the settings you used in the previous recording with
the drive mode [ ], start recording without changing the
settings.
2 Press [MENU/SET].
•
The screen selected with [Time Lapse/Animation] in the
recording menu will be displayed. (The screen will be
displayed only when you press [MENU/SET] for the first time after switching the drive
mode dial to [ ]. In other cases, the camera operates as usual, displaying the menu
screen.)
3 Press [MENU/SET].
4 Select [Mode] with 3/4, and then press [MENU/
SET].
5 Select [Stop Motion Animation] with 3/4, and then
press [MENU/SET].
Before creating a motion picture with [Stop Motion Animation]
With [Stop Motion Animation], you can make a motion picture in which objects appear to
be moving by making a recording each time you move a doll, etc, in small increments,
and then splicing the recordings together.
•
With this unit, pictures of 1 to 60 frames have to be taken per second of a motion picture.
• For smoother motion, record movement in as small increments as possible, and set the frame
rate per second (frame rate) to a large value.
To Next Page
Loading...
