9. Stabilizer, Zoom and Flash
208
Applicable modes:
You can set a flash type at [Firing Mode] in [Flash].
•
When [MANUAL] is set, the luminosity ratio ([1/1], etc.) is displayed on the flash icon on the
screen.
1 Select [Flash] in the [Rec] menu. (P37)
2 Press 3/4 to select [Manual Flash Adjust.] and then press [MENU/SET].
3 Press 2/1 to select an item and then press [MENU/SET].
•
You can set from [1/1] (full brightness) to [1/128] in steps of [1/3].
Changing the firing mode (Manual flash)
[TTL] The camera automatically sets the flash output.
[MANUAL]
Set the luminosity ratio of the flash manually. In [TTL] you can shoot the
photograph you want even when shooting dark scenes that may otherwise be
too brightly lit by the flash.
Setting the luminosity ratio (When [MANUAL] is selected)
To Next Page
Loading...
