255
12. Using the Wi-Fi function
A connection can be easily established by pressing and holding [Wi-Fi] or by using the
NFC function.
1 Press and hold [Wi-Fi].
•
The information required for connecting the smartphone to
this unit (QR code, SSID and password) is displayed.
• The same screen can be displayed by selecting the
following menu items.
A SSID and password
B QR code
• To change the connection method, press [DISP.], and then select the connection method.
2 Operate the smartphone.
•
Once the connection is complete, the image from the camera will be displayed on the
screen of the smartphone.
(After this operation, it may take a while for the connection to be completed.)
• The connection method differs according to your smartphone.
Connecting to a smartphone/tablet
Preparations:
•
Install the “Image App” in advance. (P254)
> [New Connection] > [Remote
Shooting & View]
To Next Page
Loading...
