5. Image and Picture Quality Settings
124
Adjusting Bright/Dark Portions ([Highlight Shadow])
Applicable modes:
You can adjust the brightness of bright and dark portions on an image while checking the
brightness on the screen.
1
Select the menu.
2
Press 2/1 to select the item.
3
Rotate the rear dial to adjust the brightness
of bright/dark portions.
A Bright portion
B Dark portion
C Preview display
• Each time you press the rear dial, you can switch
between the adjustment of the dark portion and that of
the bright portion.
• To register a preferred setting, press 3, and select the
destination where the custom setting will be registered to
([Custom1] (
)/[Custom2] ()/[Custom3] ()).
4
Press [MENU/SET].
> [Rec] > [Highlight Shadow]
(Standard) A state with no adjustments is set.
(Raise the contrast) Bright areas are brightened, and dark areas are darkened.
(Lower the contrast) Bright areas are darkened, and dark areas are brightened.
(Brighten dark areas) Dark areas are brightened.
/ / (Custom) Registered custom settings can be applied.
ヤ
ピ
To Next Page
Loading...
