6. Focus and Brightness (Exposure) Settings
162
Applicable modes:
It will select optimal ISO sensitivity with set value as limit depending on the brightness of
the subject.
Settings: [200]/[400]/[800]/[1600]/[3200]/[6400]/[12800]/[OFF]
•
It will work when the [Sensitivity] is set to [AUTO] or [ ].
Not available in these cases:
•
[ISO Limit Set] is disabled in the following cases:
– [Clear Nightscape]/[Cool Night Sky]/[Warm Glowing Nightscape]/[Handheld Night Shot]
(Scene Guide Mode)
– When recording motion pictures
Applicable modes:
You can adjust the ISO sensitivity settings for every 1/3 EV.
¢ Only available when [Extended ISO] is set.
• When the setting is changed from [1/3 EV] to [1 EV], [Sensitivity] will be set to value closest to
the value set during the [1/3 EV].
Applicable modes:
You can extend the available ISO sensitivity values.
Settings: [ON]/[OFF]
Setting the upper limit on ISO sensitivity
> [Rec] > [ISO Limit Set]
Setting the step increment of ISO sensitivity
> [Rec] > [ISO Increments]
[1/3 EV]
[L.80]
¢
/[L.100]
¢
/[125]/[160]/[200]/[250]/[320]/[400]/[500]/[640]/[800]/[1000]/
[1250]/[1600]/[2000]/[2500]/[3200]/[4000]/[5000]/[6400]/[8000]/[10000]/[12800]/
[H.16000]
¢
/[H.20000]
¢
/[H.25600]
¢
[1 EV] [L.80]
¢
/[L.100]
¢
/[125]/[200]/[400]/[800]/[1600]/[3200]/[6400]/[12800]/[H.25600]
¢
Extending ISO sensitivity
> [Rec] > [Extended ISO]
To Next Page
Loading...
