167
7. Shutter and Drive Settings
Taking Pictures using Burst Mode
Applicable modes:
Pictures are taken continuously while the shutter button is pressed.
•
Pictures taken with a burst speed of [SH] will be recorded as a single burst group (P225).
1
Set the drive mode dial to [ ].
2
Focus on the subject and take a picture.
• Hold down the shutter button fully to activate the Burst
Mode.
∫ Changing the burst speed
1 Select the menu.
2 Press 3/4 to select the burst speed and then press [MENU/SET].
> [Rec] > [Burst Rate]
AFS
L
3:2
H
60
i
MENU
To Next Page
Loading...
