121
4. Recording Modes
You can easily call up the settings you have registered using [Cust.Set Mem.].
Set the mode dial to [ ], or [ ]
• The custom set will be called up. If you set the mode dial to [ ], the custom set you used last
time ([ ], [ ], or [ ]) will be called up.
∫ To change a custom set in [ ]
1
Set the mode dial to [ ].
2
Press [MENU/SET] to display the menu.
3
Press 2/1 to select the custom setting you want to use, and then
press [MENU/SET].
• Saving of the selected custom settings is displayed on
the screen.
∫ Changing the settings
Registered contents do not change when the menu setting is changed temporarily with the
mode dial set to or . To change the registered settings, overwrite the registered
content using [Cust.Set Mem.] on the custom settings menu.
Recording using registered custom set
60
i
C2-1
C2-1
To Next Page
Loading...
