181
7. Shutter and Drive Settings
6 Press 3
/
4 to select the recording method, and then press [MENU/SET].
7 Press the shutter button halfway.
•
The recording screen will be displayed. You can also
perform the same operation by pressing and holding
[ ] until the recording screen is displayed.
8 Press the shutter button fully.
•
Up to 9999 frames can be recorded.
9 Move the subject to decide on the composition.
•
Repeat recording in the same way.
• If the camera is turned off during recording, a message for
resuming the recording is displayed when the camera is
turned on. Selecting [Yes] allows you to resume the
recording from the interruption point.
10 To stop the recording, press [MENU/SET], select [Time Lapse/Animation] in the
[Rec] menu, and press [MENU/SET].
•
Confirmation screen is displayed. It is ended when [Yes] is selected.
• Confirmation screen for creating a motion picture is displayed next, so select [Yes].
11 Select the methods for creating a motion picture.
•
The recording format is set to [MP4].
[Auto
Shooting]
[ON]
Takes pictures automatically at a set recording interval. When the
shutter button is pressed fully, recording starts.
[OFF] This is for taking pictures manually, frame by frame.
[Shooting
Interval]
(Only when [Auto Shooting] is set to [ON])
Sets the interval for automatic recording. A value between 1 and 60 seconds
can be set in 1 second intervals.
Press 2/1 to select the recording interval (seconds), press 3/4
to set it, and press [MENU/SET].
Recording materials skillfully
•
The recording screen displays up to two pictures taken previously. Use them as
reference for the amount of movement.
• Pressing [(] allows you to check recorded pictures. Unnecessary pictures can be
deleted by pressing [ ]. Pressing [(] again will return you to the recording
screen.
AFS
L
3:2
60
i
To Next Page
Loading...
