19
1. Before Use
There are 2 ways to operate the rear dial, rotating left or right, and deciding by pressing.
Rotating:
Selection of items or setting of values is performed during the various settings.
Pressing:
Operations that are the same as [MENU/SET] button, such as determine settings,
etc., are performed during the various settings.
•
Rear dial is described as follows in this owner’s manual.
Allows you to set the aperture, shutter speed, and other settings when in / / /
modes.
¢ Pressing the rear dial enables you to set the exposure compensation.
Rear Dial
e.g.: When rotating the rear dial to the left or right/
pressing the rear dial
Mode dial Rear Dial
(P84) Program Shift
¢
(P86) Aperture value
¢
(P87) Shutter speed
¢
(P88) Aperture value/Shutter speed
Displaying/not displaying the operation guide
> [Custom] > [Dial Guide] > [ON]/[OFF]
•
When [ON] is set, the operation guide for dials, buttons, etc. is
displayed on the recording screen.
MENU
98
98
0
To Next Page
Loading...
