2. Preparations before Recording
46
• Some functions cannot be used depending on the mode or displayed screen.
• When set to [Focus Area Set], it is possible to display the position setting screen of either AF
area or MF Assist.
Not available in these cases:
•
[Fn1] cannot be used in the following cases.
– [Miniature Effect]/[One Point Color]/[Sunshine] (Creative Control Mode)
– [Multi Exp.]
• [Fn2] cannot be used during Time Lapse Shooting.
You can directly set an assigned function to a selected image by pressing the function
button during playback.
•
The following functions can be assigned to the button [Fn1], [Fn2], [Fn3], or [Fn5].
¢ Function button settings at the time of purchase.
∫ Using the function buttons during playback
Example: When [Fn3] is set to [Favorite]
1 Press 2/1 to select the picture.
2 Press [Fn3], and then set the image as [Favorite].
•
When assigning [Print Set], set the number of pictures to be
printed next.
• When assigning [Delete Single], select [Yes] on the
confirmation screen.
Making the function button settings for playback
[Playback] Menu/Playback functions
– [Favorite] (P244): [Fn3]
¢
– [Print Set] (P245)
– [Protect] (P247)
– [Delete Single] (P73)
– [Off]: [Fn1]
¢
/[Fn2]
¢
/[Fn5]
¢
– [Restore to Default]
1/981/98
1/98
To Next Page
Loading...
