353
12. Connecting to other equipment
1 Press 3.
2 Press 3/4 to select an item and then press [MENU/SET].
3 Press 3 to select [Print start] and then press [MENU/SET].
•
If the print check screen has appeared, select [Yes], and print the pictures.
• Refer to P354 for the items which can be set before starting to print the pictures.
• Disconnect the USB connection cable after printing.
Selecting a single picture and printing it
1 Press 2/1 to select the picture and then press
[MENU/SET].
2 Press 3 to select [Print start] and then press [MENU/SET].
•
Refer to P354 for the items that can be set before starting to print the pictures.
• Disconnect the USB connection cable after printing.
Selecting multiple pictures and printing them
[Multi Select]
Multiple pictures are printed at one time.
• Press 3/4/2/1 to select the pictures and then press [MENU/
SET].
(When [MENU/SET] is pressed again, the setting is cancelled.)
• After the pictures have been selected, press 2 to select [OK], and
then press [MENU/SET].
[Select All] Prints all the stored pictures.
[Print Set (DPOF)] Prints the pictures set in [Print Set] only. (P286)
[Favorite] Prints the pictures set as favourites only. (P285)
0XOWL3ULQW
3ULQW
PictBridgePictBridge
To Next Page
Loading...
Need help?
General
