12. Connecting to other equipment
354
Select and set the items both on the screen in step 2 of the “Selecting a single
picture and printing it” and in step
3 of the “Selecting multiple pictures and printing
them” procedures.
•
When you want to print pictures on a paper size or a layout which is not supported by the
camera, set [Paper Size] or [Page Layout] to [{] and then set the paper size or the layout on
the printer.
(For details, refer to the operating instructions of the printer.)
• When [Print Set (DPOF)] has been selected, the [Print with Date] and [Num.of prints] items are
not displayed.
∫ [Print with Date]
•
If the printer does not support date printing, the date cannot be printed on the picture.
• Depending on the printer, the date print settings of the printer may take precedence so check if
this is the case.
• When printing images with a text stamp, please remember to set print with date to [OFF] or the
date will print on top.
• In some printers, the picture date for pictures taken with the aspect ratio set to [1:1] will be
printed vertically.
When asking the photo shop to print the pictures
• By stamping the date using [Text Stamp] (P276) or setting date printing at the time of the [Print
Set] (P286) setting before going to a photo shop, the dates can be printed on the pictures at the
photo shop.
∫ [Num.of prints]
You can set the number of prints up to 999.
Print Settings
[ON] Date is printed.
[OFF] Date is not printed.
To Next Page
Loading...
Need help?
General
