117
3. Recording Modes
This effect leaves one selected color to emphasize
impressiveness.
∫ Set the color to leave in
Set the color to leave in by selecting a location on the screen.
1 Press [Fn4] to display the setting screen.
•
Setting screen can also be displayed by touching in order
of [ ] then [ ].
A Function button [Fn4]
2 Select the color you want to leave by
moving the frame with 3/4/2/1.
•
You can also select the color you want to leave by touching
the screen.
• Pressing [DISP.] will return the frame back to the center.
3 Press [MENU/SET] to set.
•
Depending on the subject, the set color may not be left in.
[One Point Color]
Items that can be set
Amount of color left
Small amount of
color
Large amount of
color
To Next Page
Loading...
