185
6. Shutter and Drive Settings
• The picture will be saved in JPEG format.
• The picture will be saved with recording information (Exif information), including its shutter
speed, aperture and ISO sensitivity information.
1 Select a 4K burst file on the playback screen, and
press 3.
•
4K burst files are displayed with [ ].
• You can also perform the same operation by touching the
icon [ ].
• The slide view screen for selecting pictures will be
displayed. It takes a few seconds until the screen is
displayed.
2 Touch and drag the frames to select the frame you want to save as a picture.
•
You can also perform the same operation by pressing
2
/
1
.
<Slide view screen>
Selecting pictures from 4K burst file and saving
Setting [Playback Mode] in the [Playback] menu to [4K PHOTO] enables you to play
back only 4K burst files and pictures created from them.
4K burst files recorded with [ ] ([4K Burst]) P185
4K burst files recorded with [ ] ([4K Burst(S/S)]) P185
4K burst files recorded with [ ] ([4K Pre-Burst]) P188
4K burst files recorded with [ ] ([4K Burst]) or [ ] ([4K Burst(S/S)])
When you select pictures from any 4K burst file with long burst time, we
recommend that you make a rough selection of scenes using the 4K burst playback
screen, and then select the desired frame which you want to save as a picture by
using the slide view screen.
Position of the
displayed frame
To Next Page
Loading...
