5. Focus and Brightness (Exposure) Settings
158
Adjusting Focus Manually
Applicable modes:
Use this function when you want to fix the focus or when the distance between the lens
and the subject is determined and you do not want to activate Auto Focus.
1
Set the focus mode lever to [MF].
2
Press 2 ().
3
Press 3/4/2/1 to adjust the focus position,
and press [MENU/SET].
• The assist screen is displayed, enlarging the area. (MF
Assist)
• You can also enlarge the area by rotating the focus ring,
moving the focus lever, or pinching out (P59) the screen
or touching the screen twice.
• You can also adjust the focus position by dragging (P59) the screen.
• Pressing [DISP.] resets the focus position back to the center.
To Next Page
Loading...
