287
11. Using the Wi-Fi/NFC Function
When the camera is connected to Wi-Fi, you can press [Wi-Fi] and perform the
following operations:
¢1 These items are not displayed when you send the displayed image to a web service by
pressing 4. (P317)
¢2 This is not displayed when the destination of [Remote Shooting & View], [Playback on TV] or
[Send Images Stored in the Camera] is set to [Printer].
[Terminate the Connection] Terminates the Wi-Fi connection.
[Change the Destination]
¢1
Terminates the Wi-Fi connection, and allows you to select
a different Wi-Fi connection.
[Change Settings for Sending
Images]
¢2
Refer to P309 for details.
[Register the Current Destination
to Favorite]
¢1
Registering the current connection destination or the
connection method, you can easily connect with the same
connection method next time.
[Network Address] Displays the MAC address and IP address of this unit.
To Next Page
Loading...
