2. Getting Started/Basic Operations
76
• When [Silent Mode] is set to [ON], [Beep Volume] and [E-Shutter Vol] is set to [OFF].
• When [Live View Mode] is set to [30fps] the image quality on the recording screen may be
worse than when it is set to [60fps], but this does not affect the recorded image.
• In a dark environment, the frame rate may become slower.
• The viewfinder is fixed to [60fps].
• When using the AC adaptor (optional), [Live View Mode] is fixed to [60fps].
• [Live View Mode] is disabled while the HDMI output is being used for recording.
[Beep]
This allows you to set the volume for electronic sound and the
electronic shutter sound.
[Beep Volume]:
[u] (High)
[t] (Low)
[s] (OFF)
[E-Shutter Vol]:
[] (High)
[] (Low)
[] (OFF)
[E-Shutter Tone]:
[]/[]/[]
[Live View Mode]
Set the frame rate of the recording screen (Live View screen).
[30fps]: Reduces the power consumption, extending the
operating time.
[60fps]: Displays movements smoother.
To Next Page
Loading...
