201
7. Functions Customized for Various Subjects and Purposes
2 Press 3
/
4 to select the recording method, and then
press [MENU/SET].
3 Press 3/4 to select [Start] and then press [MENU/SET].
4 Press 3
/
4 to select [New] and then press [MENU/SET].
5 Press the shutter button fully.
•
Up to 9999 frames can be recorded.
6 Move the subject to decide on the composition.
•
Repeat recording in the same way.
• If this unit is turned off while recording, a message for
resuming the recording is displayed when the camera is
turned on. Selecting [Yes] allows you to continue the
recording from the interruption point.
7 Touch [ ] to end the recording.
•
It can also be ended by selecting [Stop Motion Animation]
from the [Rec] menu and then pressing [MENU/SET].
• When [Auto Shooting] is set to [ON], select [End] on the
confirmation screen.
(If [Pause] has been selected, press the shutter button
fully to resume the recording.)
• Confirmation screen is displayed. It is ended when [Yes] is selected.
• Confirmation screen for creating a motion picture is displayed next, so select [Yes].
[Auto
Shooting]
[ON]
Takes pictures automatically at a set recording interval.
When the shutter button is pressed fully, recording starts.
[OFF]
This is for taking pictures manually, frame by frame.
[Shooting
Interval]
(Only when [Auto Shooting] is set to [ON])
Sets the interval for automatic recording. A value between 1 and
60 seconds can be set in 1 second intervals.
Press 2/1 to select the recording interval (seconds), press 3/4
to set it, and press [MENU/SET].
Recording materials skillfully
•
The recording screen displays up to two pictures taken previously. Use them as
reference for the amount of movement.
• Pressing [(] allows you to check recorded pictures.
Unnecessary pictures can be deleted by pressing [ ].
Pressing [(] again will return you to the recording screen.
30
To Next Page
Loading...
