263
10. Playing Back and Editing Images
∫ Changing the slide show settings
You can change the settings for slide show playback by selecting [Effect] or [Setup] on the
slide show menu screen.
[Effect]
This allows you to select the screen effects when switching from one picture to the next.
[AUTO]/[NATURAL]/[SLOW]/[SWING]/[URBAN]/[OFF]
•
When [URBAN] has been selected, the picture may appear in black and white as a screen effect.
• [AUTO] can be used only when [Category Selection] has been selected. The pictures are
played back with the recommended effects in each category.
• [Effect] is fixed to [OFF] when in [Video Only] or during the slide show for [ ], [ ], [ ] in
[Category Selection].
• Even if [Effect] is set, it does not work during a slide show of Group Pictures.
• When pictures are displayed on a TV connected via an HDMI micro cable or when
vertically-displayed pictures are played back, some of the [Effect] settings will not work.
[Setup]
[Duration] or [Repeat] can be set.
•
[Duration] can be set only when [OFF] has been selected as the [Effect] setting.
• When playing back the following pictures, the [Duration] setting is disabled.
– Motion pictures
– 4K burst files
– Panorama pictures
– Group Pictures
[Duration] [5SEC]/[3SEC]/[2SEC]/[1SEC]
[Repeat] [ON]/[OFF]
[Sound]
[AUTO]: Music is played when the still pictures are played back,
and audio is played when the motion pictures are played
back.
[Music]: Music is played back.
[Audio]: Audio (only for motion pictures) is played back.
[OFF]: There will be no sound.
To Next Page
Loading...
