11. Using the Wi-Fi/NFC Function
314
(For Mac)
Supported OS: OS X v10.5 to v10.10
Example: OS X v10.8
1 Select a folder you intend to use for receiving, then click on the items in the
following order.
[File] [Get Info]
2 Enable sharing of the folder.
•
For details, refer to the operating instructions of your PC or Help on the OS.
1 Select the menu. (P63)
2 Select [Via Network] or [Direct], and connect. (P324)
3 Select the PC you want to connect to.
•
When the PC you want to connect to is not displayed, select [Manual Input], and enter the
computer name of the PC (NetBIOS name for Apple Mac computers).
4 Select the folder you want to send.
5 Check the send settings, and select [Set].
•
To change the send setting, press [DISP.]. (P309)
6 Take pictures. (P308)
6 Select the picture. (P308)
•
Folders sorted by the sent date are created in the specified folder, and pictures are saved in
those folders.
• If the screen for a user account and password entry appears, enter the one you set on your PC.
• When the computer name (NetBIOS name for Apple Mac computers) contains a space (blank
character), etc., it may not be recognized correctly.
If a connection attempt fails, we recommend that you change the computer name (or NetBIOS
name) to the one consisting of only alphanumeric characters, with a maximum of
15 characters.
Sending images to the PC
> [Setup] > [Wi-Fi] > [Wi-Fi Function] > [New Connection] >
[Send Images While Recording] or [Send Images Stored in the Camera] >
[PC]
When [Send Images While Recording] has been selected
When [Send Images Stored in the Camera] has been selected
MENU
To Next Page
Loading...
