51
2. Getting Started/Basic Operations
3 Press [MENU/SET] and set.
•
You can also complete this step by performing either of the operations below:
– Press the shutter button halfway
– Press [Fn13]
• Items that are temporarily assigned to the front/rear dials can be used only while the guide
(step
1) or setting screen (step 2) is displayed.
Setting the operation methods of the front dial and rear dial
> [Custom] > [Dial Set.]
[Assign Dial (F/SS)]
Assigns the operations of the aperture value and shutter speed
in Manual Exposure Mode.
[F SS]:
Assigns the aperture value to the front dial, and the shutter
speed to the rear dial.
[SS F]:
Assigns the shutter speed to the front dial, and the aperture
value to the rear dial.
[Rotation (F/SS)]
Changes the rotation direction of the dials for adjusting the
aperture value and shutter speed.
[]/[]
[Exp Comp Setup] (P167)
Allows you to expand the exposure compensation range with
the front or rear dial. (Only when the exposure compensation
dial is set to [j3] or [i3].)
[] (Front Dial)/[ ] (Rear Dial)/[OFF]
[Dial Operation Switch
Setup]
Sets the items to be assigned temporarily to the front/rear dials
when you press the function button to which [Dial Operation
Switch] is assigned.
[] ([Front Dial Operation])/[ ] ([Rear Dial Operation])
• Items that can be set are as follows.
– [Sensitivity] (P168)
– [White Balance] (P129)
– [Drive Mode] (P174)
– [AF Mode/MF] (P144)
– [Photo Style] (P123)
– [Filter Select] (P107, 125)
– [Aspect Ratio] (P133)
– [4K PHOTO] (P178)
– [Highlight Shadow] (P128)
– [i.Dynamic] (P136)
– [i.Resolution] (P136)
– [Flash Mode] (P229)
– [Flash Adjust.] (P232)
•
[Highlight Shadow] uses the two dials. It will be automatically
assigned to both of the dials when you assign it to either of them.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
