2. Getting Started/Basic Operations
82
• If you set a different language by mistake, select [~] from the menu icons to set the desired
language.
• This enables the firmware versions of the camera and lens to be checked.
• Press [MENU/SET] on the version display screen to display information about the software on
the unit.
• The folder number is updated and the file number starts from 0001.
• A folder number between 100 and 999 can be assigned.
The folder number should be reset before it reaches 999. We recommend formatting the card
(P33) after saving the data on a PC or elsewhere.
• To reset the folder number to 100, format the card first and then use this function to reset the
file number.
A reset screen for the folder number will then appear. Select [Yes] to reset the folder number.
• When the setup/custom settings are reset, the following settings are also reset.
– The [World Time] setting
– The settings of [Travel Date] (departure date, return date, location)
– The settings of [Rotate Disp.], [Picture Sort] and [Delete Confirmation] in the [Playback] menu
• The folder number and the clock setting are not changed.
[Menu Information]
Explanations of the menu items and settings are displayed on the
menu screen.
[ON]/[OFF]
[Language]
Set the language displayed on the screen.
[Version Disp.]
—
[Self Timer Auto Off]
Set this item to cancel the self-timer when you turn off the
camera.
[ON]/[OFF]
[No.Reset]
Reset the file number of the next recording to 0001.
[Reset]
The recording or setup/custom settings are reset to the default.
The following settings are reset to the default:
–
Recording settings (Except for [Face Recog.] and [Profile Setup]
settings) and drive mode
– Recording settings ([Face Recog.] and [Profile Setup] settings)
– Setup/custom settings
To Next Page
Loading...
