3. Recording Modes
86
(±: possible, —: not possible)
1
Set the mode dial to [¦].
• The camera will switch to either the most recently used
of Intelligent Auto Mode or Intelligent Auto Plus Mode.
2
Align the screen with the subject.
• When the camera identifies the optimum scene, the icon
of the scene concerned is displayed in blue for 2 seconds,
after which its color changes to the usual red. (Automatic
scene detection)
∫ Functions that work automatically
•
The following functions are performed automatically to allow the camera to make the optimal
settings.
– Scene Detection
– Backlight Compensation
– [Face/Eye Detection]
– Auto White Balance
– Intelligent ISO sensitivity control
– [Red-Eye Removal]
– [i.Resolution]
– [i.Dynamic]
– [Long Shtr NR]
– [Shading Comp.]
– [Diffraction Compensation]
– [Quick AF]
– [AF Assist Lamp]
Intelligent Auto Plus Mode Intelligent Auto Mode
Setting the brightness
(Exposure)
± —
Setting the color tone ± —
Defocus Control ±±
Menus that can be set Refer to P93 for details.
To Next Page
Loading...
