- 67 -
Advanced (Recording pictures)
[REC] Mode:
Taking Pictures Using the Built-in Flash
A To open the flash
Press the flash open switch.
B To close the flash
Press the flash until it clicks.
•
Be sure to close the flash when not in
use.
• The flash setting is fixed to [Œ] while
the flash is closed.
Note
•
Be careful not to catch a finger when closing a flash bulb.
Set the built-in flash to match the recording.
•
Open the flash.
Select [FLASH] in the [REC] mode menu. (P28)
Press 3/4 to select a mode and press
[MENU/SET].
• For information about flash settings that can be selected, refer
to
“Available Flash Settings by Recording Mode”. (P69)
Press [MENU/SET] to close the menu.
• You can also press the shutter button halfway to finish.
Switching to the appropriate flash setting
To Next Page
Loading...
