Advanced (Recording pictures)
- 100 -
This is a convenient mode for shooting rapid movement or a decisive moment.
∫ Setting the speed priority or image priority
1 Press 3/4 to select [SPEED PRIORITY] or [IMAGE PRIORITY] and then press
[MENU/SET] to set.
2 Take pictures.
•
Still pictures are taken continuously while the shutter button is pressed fully.
• 2.5M (1:1), 3M (4:3), 2.5M (3:2) or 2M (16:9) is selected as the picture size.
• The Burst speed changes according to the recording conditions.
• The number of Burst recording pictures are limited by the picture-taking conditions and the type
and/or status of the card used.
• The number of Burst recording pictures increases immediately after formatting.
Note
•
It will be a normal motion picture recording during the motion picture recording.
• The flash setting is fixed to [Œ].
• [i.ZOOM] is fixed to [OFF].
• [QUALITY] is automatically fixed to [›].
• You can take pictures suitable for 4qk6q/10k15 cm printing.
• The focus range is 1 cm (0.04 feet) (Wide)/30 cm (0.99 feet) (Tele) to ¶.
• The focus, zoom, exposure, White Balance, shutter speed and ISO sensitivity are fixed to the
settings for the first picture.
• The ISO sensitivity is automatically adjusted. Note, however, that the ISO sensitivity is set high
to achieve a high shutter speed.
• Depending on the operating conditions, it may take time to take the next picture if you repeat
taking a picture.
[HI-SPEED BURST]
Maximum Burst speed
approx. 10 pictures/second (Speed priority)
approx. 6.5 pictures/second (Image priority)
Number of recordable
pictures
approx. 15 to 100
To Next Page
Loading...
