- 161 -
Advanced (Playback)
[PLAYBACK] Mode: ¸
Using the [PLAYBACK] Mode Menu
You can use various functions in Playback Mode to rotate pictures, set protection for them
etc.
•
With [TEXT STAMP], [RESIZE], [CROPPING] or [LEVELING], a new edited picture is created.
A new picture cannot be created if there is no free space on the built-in memory or the card so
we recommend checking that there is free space and then editing the picture.
You can display pictures by recording date.
Note
•
The recording date of the picture selected in the playback screen becomes the date selected
when the calendar screen is first displayed.
• If there are multiple pictures with the same recording date, the first picture recorded on that day
is displayed.
• You can display the calendar between January 2000 and December 2099.
• If the date is not set in the camera, the recording date is set as January 1st, 2010.
• If you take pictures after setting the travel destination in [WORLD TIME], the pictures are
displayed by the dates at the travel destination in Calendar Playback.
[CALENDAR]
Select [CALENDAR] on the [PLAYBACK] Mode menu. (P28)
• You can also rotate the zoom lever several times towards [L] (W) to display the
calendar screen. (P59)
Press 3/4/2/1 to select the date to be played
back.
• If there were no pictures recorded during a month, that month is
not displayed.
• It is also possible to select the date by rotating the rear dial.
Press [MENU/SET] to display the pictures that
were recorded on the selected date.
• Press [‚] to return to the calendar screen.
• It is also possible to display pictures by pressing the rear dial.
Press 3/4/2/1 to select a picture and then press [MENU/SET].
• The picture that was selected will appear.
• It is also possible to select pictures with the rear dial.
To Next Page
Loading...
