Advanced (Playback)
- 162 -
You can add text (comments) to pictures. After text has been registered, it can be stamped
in prints using [TEXT STAMP] (P164). (Only alphabetic characters and symbols can be
entered.)
Select [TITLE EDIT] on the [PLAYBACK] Mode menu. (P28)
Press 3/4 to select [SINGLE] or [MULTI] and
then press [MENU/SET].
Enter the text. (P153)
Press [‚] to return to the menu screen.
¢
¢The menu screen is automatically restored when [MULTI] is selected.
• Press [MENU/SET] to close the menu.
Note
•
To delete the title, erase all the text in the text input screen.
• Text can be scrolled if all of the registered text does not fit on the screen.
• You can print out texts (comments) using the “PHOTOfunSTUDIO 5.0 HD Edition” bundled
software on the CD-ROM (supplied).
• You can set up to 50 pictures at one time with [MULTI].
• You cannot use [TITLE EDIT] for the following types of pictures:
– Motion pictures
– Protected pictures
– Pictures taken with [ ], [ ] or [ ]
– Pictures recorded with other equipment
[TITLE EDIT]
Select the picture, and then
press [MENU/SET] to set.
• [’] is displayed for pictures with titles
already registered.
[MULTI] setting
Press [DISPLAY] to set (repeat),
and then press [MENU/SET] to set.
[SINGLE] [MULTI]
Press 2/1 to select
the picture.
Press 3/4/2/1 to
select the pictures.
•
The setting is canceled when [DISPLAY] is pressed again.
To Next Page
Loading...
